Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co., Ltd.
8 Configuration instructions on computer
⚫
The following figure shows the E220-400T30S configuration host computer display interface, the user can switch to the
command mode through M0M1, and quickly configure and read the parameters on computer.
⚫
In the configuration on computer, the module address, frequency channel, network ID, and key are all in decimal mode. The
range of values of each parameter is:
Network address: 0-65535
Frequency channel: 0-83
Network ID: 0-255
Key: 0-65535
9 Hardware design
⚫
It is recommended to use a DC stabilized power supply. The power supply ripple factor is as small as possible,
Copyright ©2012–2018，Chengdu Ebyte Electronic Technology Co.,Ltd.
E220-400T30S User manual
18
Advertisement
Table of Contents
