Pulse Width Modulation Operating Mode Parameter - Siemens SIMATIC S7-1500 Manual

Parameters/address space
4.1 Parameters
4.1.3

Pulse width modulation operating mode parameter

DQ 8x24VDC/2A HF parameters
The table below lists the parameters in pulse width modulation mode. These parameters
apply to channels 0 and 4.
Table 4- 2 Configurable parameters and their defaults
Parameters Range of values
Diagnostics
Yes/No
No supply voltage
•
L+
Yes/No
Short circuit
•
to ground
Reaction to CPU
•
STOP
•
Operating mode
•
•
Pulse width modulati- 2 ... 100 ms*
on
(Period duration)
* 20 ... 1000 [x 0.1] with GSD file
24
Default setting
No
No
Turn off
Turn off
Keep last value
Digital output
Digital output (DQ)
DQ
Pulse width modula-
tion
10 ms
Parameter Scope with configuration software,
assignment
in RUN
Integrated in the
hardware catalog
as of STEP 7
(TIA Portal)
as of V 13 SP1
GSD file
PROFINET IO
Yes Channel
Yes Channel
Yes Channel
Yes Channel
No Module
DQ 8x24VDC/2A HF Digital Output Module (6ES7522-1BF00-0AB0)
e.g., STEP 7 (TIA Portal)
GSD file
PROFIBUS DP
---
---
---
---
---
Manual, 06/2018, A5E03485650-AF