Siemens SIMATIC S7-1500 Manual page 12

Properties
The module has the following technical properties:
● 8 digital outputs, electrically isolated in groups of 4
– of which optional channels 0 and 4 are available for pulse width modulation (PWM).
● Rated output voltage 24 V DC
● Rated output current 2 A
● Configurable substitute values (per channel)
● Configurable diagnostics (per channel)
● Suitable for solenoid valves, contactors, DC contactors and indicator lights
● Switching cycle counter for connected actuators, e.g. solenoid valves
The module supports the following functions:
Table 2- 1 Version dependencies of the module functions
Function
Firmware update
Identification data I&M0 to I&M3
Parameter assignment in RUN
Module-internal Shared Output
(MSO)
Pulse-width modulation (PWM)
for channel 0 and 4
Switching cycle counter
You can configure the module with STEP 7 (TIA Portal) and with a GSD file.
DQ 8x24VDC/2A HF Digital Output Module (6ES7522-1BF00-0AB0)
Manual, 06/2018, A5E03485650-AF
Firmware version of
the module
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher
V2.0.0 or higher V13 Update 3 or higher
V2.1.0 or higher
V2.2.0 or higher as of V15.0 with HSP0247
PROFINET IO only
•
Central operation with a
•
S7-1500 CPU is support-
ed
Configuration software
STEP 7
(TIA Portal)
V12 or higher
V12 or higher
V12 or higher
(PROFINET IO only)
as of V13, SP1
with HSP 0178
Product overview
2.1 Properties
GSD file in STEP 7
(TIA Portal) V12 or higher, or
STEP 7 V5.5 SP3 or higher
--- / X
X
X
X
(PROFINET IO only)
X
(PROFINET IO only)
X
(PROFINET IO only)
11