GE RAK149P2 Owner's Manual & Installation Instructions page 6

INSTALLATION INSTRUCTIONS
TO INSTALL THERMOSTAT
14. Insert two "AAA" batteries into battery holder. Verify that
they are oriented as shown on battery holder.
15. Replace cover on thermostat by snapping it in place.
16. Plug the unit in or turn on power to the system at the main
service panel.
17. Test thermostat operation as described in the "Testing the
Thermostat" section.
Wiring diagrams
Table 1: Terminals for five wires 1-stage heat/1-
stage cool system
Note: Connect G terminal of thermostat to Zoneline
GL terminal for low fan speed or terminal GH for high fan
speed. Only one can be selected.
6
(cont.)
49-5000517 Rev. 2