Subscribe to Our Youtube Channel
Related Manuals for PowerTech ZM9124
Summary of Contents for PowerTech ZM9124
- Page 1 200W Canvas Blanket Solar Panel with Charge Controller ZM9124 User Manual More information https://www.caravansplus.com.au...
-
Page 2: Box Contents
INTRODUCTION Please ensure that you have read the product manual and instractions in full before using this product. Failure to do so many result in incorrect operation and potentially impact the performance of the product. This product converts natural sunlight into DC electricity. It is designed to charge a 12V battery. -
Page 3: Specifications
SPECIFICATIONS Solar Panel: Open Circuit Voltage: 23.7V Short Circuit Current: 9.8A Dimensons: Solar Charge Controller System Voltage: 12/24V Auto Sealed: 14.4V Flood: 14.6V Float Charge: 13.7V (Default, Adjustable) Discharge Reconnect: 12.6V (Default, Adjustable) HOW TO USE • Unfold the solar panel. •... -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS • Ensure battery has enough voltage for the solar charge controller to recognise the • Charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator. ventilated area. HOW TO CHARGE A 12V BATTERY 1. -
Page 5: Display Settings
LCD DISPLAY/KEY Press to incease value Down: Press to decrease value DISPLAY / SETTINGS More information https://www.caravansplus.com.au... -
Page 6: Troubleshooting
TROUBLESHOOTING Issue Probably Cause Solution Charge icon not on when Solar panel closed or reversed Reconnect sunny Mode setting wrong Set again Recharge Over load Reduce load watts Short circuit protection Auto reconnect Power off connected More information https://www.caravansplus.com.au... - Page 7 More information https://www.caravansplus.com.au...
- Page 8 Distributed by: Electus Distribution Pty. Ltd. 320 Victoria Rd, Rydalmere NSW 2116 Australia www.electusdistribution.com.au Made in China More information https://www.caravansplus.com.au...
Need help?
Do you have a question about the ZM9124 and is the answer not in the manual?
Questions and answers
Solar Panel indicator is flashing
The PowerTech ZM9124 solar panel indicator may be flashing due to a low battery, overload, or short circuit protection. Possible solutions include recharging the battery, reducing the load watts, or waiting for the system to auto-reconnect in case of a short circuit.
This answer is automatically generated
@Mr. Anderson
@Jeff McCormick