Pret a Pousser Lilo Manual page 12

english
HOW CAN I ADJUST THE LIGHT?
A ON/OFF button and a button
to adjust the light
Not all plants depend on the same light intensity. Due to this, it's normal if they don't all grow at the
same rate.
The "summer" mode corresponds to a higher light intensity and a 14h cycle, it suits plants
that are used to being bathed in sunlight.
The "spring" mode corresponds to a softer light intensity and a 12h cycle, for the more
delicate plants.
Find the right light settings in the app. Note: if your 3 plants have different needs in terms of light
intensity, always choose "spring" mode.
When you connect the light and switch on the ON button, the light will start its cycle. For instance,
if you have turned on the light at 8am in "summer" mode, it will turn off automatically at 10pm and
will turn on again at 8am the next morning. The light will turn on and off progressively to simulate
the sun and to not shock your plants too much.
Always keep a gap of at least 10cm between the light and your plants. If your plants are too close to
the light, change to "spring" mode or cut your plants.
12
Keep a distance of 10cm
between the plants and light
Afterwards, ajust accordingly to
the height of your tallest plant