Pret a Pousser Lilo Manual page 10

english
SETTING UP LILO IN 5 MINUTES
1.
Insert the bamboo rod into the base
No need to force the rod all the way into the base, a small
space will still be visible.
3.
Place the light on the rod
Connect the light and activate it by switching the ON/OFF
button once, leaving it on ON, at the time you would like it to
light up: this will set the light cycle. Lilo should stay plugged
and will turn on at the same hour the next day, automatically.
5.
Insert the pod into the floater
Every plant grows at a different speed, so it would be best to
insert the "slowest" plants up to a week before the speedy
ones, so that all of your plants will be able to grow up together.
To help you with this, check out the Prêt à Pousser app!
10
2.
Plug the power cable into the light
Check if the cable has been plugged all the way. Warning:
Do not use any other charger than the one supplied with your
indoor garden (for instance, the one of your smartphone).
They are not compatible, even though they look alike.
4.
Put the floaters in the pots
Fill them with water until the top of the floater reaches just
above the pot.
AND WE'RE
READY TO GROW!