Advertisement
4.1.
take all the components out of the carton and compare to the
parts list.
4.2.
Pull out the drawer until the plastic latches are exposed.
4.3.
Press the plastic latches of both sides at the same time fig.2,
pull out the drawer.
4.4.
Screw in the four adjustable feet(F) to the legs(C) fig.3.
4.5.
Attach legs to main draw body fig.4. Fix in position using screws
provided
4.6.
Attach lower shelf(D) and shelf supports(E) as shown fig.5
using screws provided.
4.7.
Position and attach desk top(B) fig.5 using screws provided.
4.8.
Position and attach desk hood(A) fig.5 using screws provided.
4.9.
Push Draw(B1) back into Desk top assembly(B2) fig.6. Press the plastic latches as per instruction 4.3 to complete assembly
4.10.
Adjust feet to level workstation.
Parts support is available for this product. to obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.
environmental Protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPortant: no liability is accepted for incorrect use of this product.
warranty: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
fig.3
fig.5
fig.2
fig.4
fig.6
Advertisement
