Sealey AP1905C Quick Start Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Instructions
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this bench.
‰
Locate bench in a suitable working area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
WARNING! Use bench on level and solid ground, preferably concrete. Avoid tarmacadam since the bench may sink into the surface.
‰
Keep the bench clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the working area.
9
DO NOT use the bench for any purpose other than that for which it is designed.
8
DO NOT exceed maximum capacity of workbench.
8
DO NOT undertake work on the bench without the work piece being adequately secured. Use clamps or a vice (not included) to secure the
8
work piece. Available from your Sealey stockist.
DO NOT use the bench out of doors.
8
DO NOT get the bench wet or use in damp or wet locations or areas where there is condensation.
8
DO NOT clean the bench with any solvents which may damage the paint surface or the protective coating on the wooden top.
8
2. INTRODUCTION
i
Heavy-duty powder coated metal frame with a 40mm MDF work surface. Storage splits into 3-sections with a choice of cupboards, drawers and
an open space with an adjustable shelf. All cabinet drawers fitted with ball-bearing slides. Fully lockable and features adjustable feet to help
stability when placed on an uneven surface. Supplied flat-packed with two keys.
3. SPECIFICATION
Model no: ................................................................AP1905C
Size (W x D x H):...................................1690 x 600 x 865mm
Drawer (x3): ............................................415 x 160 x 415mm
Capacity: ...................................................................... 300kg
4. CONTENTS
4.1. Panels etc.
Part Description
A Top
B1 Side
C Bottom
D1 Left support
D2 Right support
E Drawer
F1 Left Door
F2 Right door
G Shelf
H Back
I Leg leveller assy.
J1 Left slide
J2 Right slide
© Jack Sealey Limited
WORKSTATION WITH 3 DRAWERS & 2 CUPBOARDS
MODEL NO:
Quantity
1
2
1
1
1
3
1
1
2
3
4
3
3
Original Language Version
AP1905C
AP1905C Issue:2 (4) 17/01/22