Focustronic Mastertonic User Manual page 10

• Make sure you reset the refill counter to get the correct
alerts, and a 100% filled vial = 20 ml.
• Never fill above the line, see picture.
• Once you have chosen "Vial X" for "Reagent Y", then
always keep to that, to avoid the risk of contamination.
• When it´s time to refill, take as a good routine to from time
to time rinse out the vial with RO water before you refill it.
Its very important this RO water is really true RO water, if you doubt that better to
buy some distilled water for this purpose.
* Vial position is labeled by a number (see pic), and the "active position" is slightly to
the left. If you for instance assign a reagent to vial 3, the carousel will move so the
vial 3 position in the carousel is slightly to the left of the middle.
Position number is labeled on the
carousel.
Assign the reagents for a parameter:
1) Open the Focustronic app and choose Mastertronic in the device list from the
Dashboard
2) Choose the parameter, and choose Assign
reagent vials. Choose your brand of reagent
refill.
3) In the app input which reagent (A,B,C, 1,2,3 )
is in which vial (1-12), and also add any refilled
volume (a full vial = 20 ml)
4) Save
The "active" position is slightly to the
left of center.
10