Table of Contents
Advertisement
CD CHANGER CONTROLS
Built into this radio are controls to operate an optional CD changer.
Please check with your Rampage/Audiovox car stereo specialist
or call 1-800-645-4994 for recommendations of the models that will
work with this radio.
Adjustment of the audio functions (volume, tone, balance, and fader)
for the CD changer operate in the same manner as they do for
radio play. The following controls will operate the CD changer when
it is installed and connected to this radio. Refer to the owner's
manual included with the CD changer for instructions on the
installation and correct loading and use of the CD magazine.
CD CHANGER MODE SELECTOR (MODE)
During radio or CD play, press this button to select operation of the
CD changer as shown by CDC on the display panel. Disc play will
begin and the DISC and track number will be shown on the display
panel. When the magazine is loaded into the changer, play will
begin from the first track of the first disc in the magazine.
DISC SELECT (D.UP/D.DN)
These buttons are used to select the desired disc for play. To
advance to a higher number disc, press the D.UP button. To return
to a lower number disc, press the D.DN button. The number of the
disc in play will be shown on the display panel.
TRACK SELECT (
+
The Track Select functions are used to quickly access the beginning
of a particular track. Each time the Forward Track Select (
side of the button is pressed, the next higher track number will be
selected as shown on the display panel. Similarly, each time the
Backward Track Select (
-
track number will be selected as shown on the display panel.
/
-
)
) button is pressed, the next lower
CUE/REVIEW FUNCTIONS (
High-speed audible search to any section of the disc can be made
by the Cue and Review functions. Repeated press the Cue (
side of the button to advance rapidly in the forward direction (disc
play symbol rotation on the display panel will stop) or the Review
(
-
) side of the button to advance rapidly in the backward direction.
TRACK/DISC SCAN SELECTOR (SCN)
When the SCN button is pressed, the SCAN indication will appear
on the display panel, and the first 10 seconds of each track on the
disc will be played in order. When a desired track is reached,
press the SCN button twice and play of the selected track will
continue (SCAN will disappear from the display panel). The Track
Scan mode will also be canceled by activating the Repeat or
Random Play function.
When the Scan button is pressed twice the DISC and SCN
indications will appear on the display panel and the first 10 seconds
of the first track on each disc in the magazine will be played. When
a desired disc track is reached, press the SCN button again and
play of the selected disc will continue (DISC and SCAN will
disappear from the display panel). The Disc Scan mode will also
be canceled by activating the Repeat or Random Play function.
DISC/TRACK REPEAT PLAY (RPT)
When the RPT button is pressed, the RPT indication will appear on
the display panel and play of the selected track will be continually
repeated until the Track Repeat mode is canceled by pressing the
RPT button twice or by activating the Scan or Random Play
functions.
)
+
When the RPT button is pressed twice, the DISC and RPT
indications will appear on the display panel and play of the selected
disc will be continually repeated until the Disc Repeat mode is
-11-
+
/
-
)
+
)
Advertisement
Table of Contents
