Advertisement
BASS CONTROL
To adjust the bass level, first select the Bass mode by pressing
3
the Select button
until the BAS indication appears on the dis-
play panel. Within 5 seconds of choosing the Bass mode, press
+
-
the
or
buttons of the Level Control
response as desired. The bass level will be shown on the display
panel from a minimum of B -6 to a maximum of B +6 (B 0
represents flat response). The display will automatically return
to the normal indication 5 seconds after the last adjustment or when
another function is activated.
TREBLE CONTROL
To adjust the treble level, first select the Treble mode by pressing
3
the Select button
until the TRE indication appears on the
display panel. Within 5 seconds of choosing the Treble
+
-
mode, press the
or
buttons of the Level Control
the treble response as desired. The treble level will be shown on
the display panel from a minimum of T -6 to a maximum of T +6
(T 0 represents flat response). The display will automatically
return to the normal indication 5 seconds after the last adjustment
or when another function is activated.
LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select the Balance
mode by pressing the Select button
appears on the display panel. Within 5 seconds of choosing the
-
Balance mode, press the
2
Control
to adjust the stereo balance of the right and left
speakers. The balance position will be shown on the display
panel from L 12 (full left) to R 12 (full right). When the volume
level between the left and right speakers is equal, C 00 will be
shown on the display panel. The display will automatically return
to the normal indication 5 seconds after the last adjustment or
when another function is activated.
2
to adjust the bass
2
to adjust
3
until the BAL indication
5
+
or the
button
of the Level
FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select the Fader mode
by pressing the Select button
on the display panel. Within 5 seconds of choosing the Fader
+
mode, press the
or the
adjust the front-rear speaker levels as desired. The fader position
will be shown on the display panel from R 12 (full rear) to F 12 (full
front). When the volume level between the front and rear speakers
is equal, C 00 will be shown on the display panel. The display
will automatically return to the normal indication 5 seconds
after the last adjustment or when another function is activated.
LOUDNESS CONTOUR (LOUD)
When listening to music at low volume levels, this feature will
boost the bass and treble ranges to compensate for the
characteristics of human hearing. Press the button to activate
this feature as indicated by LOU on the display panel. Pressing the
button again will de-activate the function and LOU will disappear
from the display.
AUDIO MUTE (MUTE)
This button is used to mute the volume from the system. By
pressing the button, the indication MUTE will appear on the display
panel and the volume will be muted. Pressing the Mute button
again or activating any other function of the unit will return to the
volume level setting in use before the Mute function was activated.
AM/FM BAND SELECTOR
During radio play, each time the button is pressed, the radio
band changes. The indications AMI, AMII, FMI, FMII, or FMIII
will appear on the display panel according to your selection.
During CD play, pressing this button will change to radio operation
without ejecting the disc.
-2-
3
until the FAD indication appears
-
buttons of the Level Control
2
to
Advertisement
