Floppy Disk Drive Connector: Fdd1; Fan Power Connectors: Cpufa1 / Sysfa1 - MSI MS-7015 Getting Started

MS-7015 M-ATX Mainboard
The mainboard provides connectors to connect to FDD, IDE HDD, case,
LAN, USB Ports, IR module and CPU/System/Power Supply FAN.

Floppy Disk Drive Connector: FDD1

The mainboard provides a standard floppy disk drive connector that
supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types.

Fan Power Connectors: CPUFA1 / SYSFA1

The CPUFA1 (processor fan) and SYSFA1 (system fan) support system
cooling fan with +12V. It supports three-pin head connector. When connecting
the wire to the connectors, always take note that the red wire is the positive
and should be connected to the +12V, the black wire is Ground and should be
connected to GND. If the mainboard has a System Hardware Monitor chipset
on-board, you must use a specially designed fan with speed sensor to take
advantage of the CPU fan control.
MSI Reminds You...
1. Always consult the vendors for proper CPU cooling fan.
2. CPUFA1 supports the fan control. You can install the Core
Center utility that will automatically control the CPU fan speed
according to the actual CPU temperature.
2-14
Connectors
GND
+12V
Sensor
CPUFA1
FDD1
GND
+12V
Sensor
SYSFA1