Setting Up A Controller In Offline Mode - Hunter Hydrawise PRO-C Software/App Owner's Manual

Irrigation controllers

Hide thumbs Also See for Hydrawise PRO-C:

Setting up a Controller in Offline

Mode

Offline programming will allow your controller to run without any internet access like a

traditional irrigation controller. Hydrawise controllers have two different modes that will run

in offline mode.

Modes

Standard Mode

Advanced Mode

Standard offline programming will allow the controller to run like our traditional controllers

the X-core and the Pro-C models. Each of the six programs (a-f) allows you to start each

program up to four times a day, set run lengths and set specific days to water.

Advanced offline programming will allow the controller to run independently for each

zone(station). Each zone (station) can have up to four start times with their individual run

times.

To set your controller in Offline Mode for manual configuration, please follow the steps

below:

1. From the main menu, tap on Settings.

2. Select Config.

3. Select Factory Default.

4. Next , press Erase Config. This will reset the controller back to factory settings. You

will be presented with a warning dialogue.

5. Select Configure Offline and follow the wizard steps.

This wizard will guide you through the steps to set up your controller to run in offline mode

Controller Models

HPC, HCC, PRO-HC, and X2

HPC, HCC, PRO-HC, and HC

Table of Contents