Special Notes; Precautions General; Volume Control - Sharp HT-SB110 Operation Manual

Special notes

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
The Bluetooth ® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such
marks by SHARP is under license. Other trademarks and trade names are those of their respective owners.
Precautions
General
Please ensure a minimum distance of 5 cm around the
apparatus for sufficient ventilation. Do not block any
ventilation openings of this product.
Use the sound bar on a firm, level surface free from
vibration.
Keep the sound bar away from direct sunlight, strong
magnetic fields, excessive
electronic/electrical equipment
facsimiles, etc.) which generate electrical noise.
Do not place anything on top of the sound bar.
Do not expose the sound bar to moisture, to
temperatures higher than 60°C (140°F) or to extremely
low temperatures.
If the sound bar does not work properly, unplug and plug
it in again. Then turn it on.
In case of an electrical storm, unplug the sound bar for
safety.
Hold the AC power plug by the head when removing it
from the wall socket, as pulling the lead can damage
internal wires.
The AC power plug is used as a disconnect device and
shall always remain readily operable.
Do not remove the outer cover, as this may result in
electric shock. Refer internal service to your local
SHARP service facility.
The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
Attention should be drawn to the environmental aspects
of battery disposal.
This unit should only be used within the range of 5°C -
35°C (41°F - 95°F).
The apparatus is designed for use in moderate climates.
SHARP is not responsible for damage due to improper
use. Refer all servicing to a SHARP authorised service
centre.
dust, humidity and
(home computers,
E-2
Warning:
The voltage used must be the same as that specified on
this sound bar. Using a higher voltage is dangerous and
may result in a fire or other type of accident causing
damage. SHARP will not be held responsible for any
damage resulting from such usage.
When the button is set at STAND-BY position, mains
voltage is still present inside the sound bar. When the
button is set at STAND-BY position, the sound bar
may be brought into operation by the remote control.
This sound bar contains no user serviceable parts.
Never remove covers unless qualified to do so. This
sound bar contains dangerous voltages, always remove
mains plug from the socket before any service operation
and when not in use for a long period.
To prevent fire or shock hazard, do not expose this
appliance to dripping or splashing. No objects filled with
liquids, such as vases, shall be placed on the apparatus.
This equipment is a Class II or double insulated
electrical appliance. It has been designed in such a way
that it does not require a safety connection to electrical
earth.

Volume control

The sound level at a given volume setting depends on
speaker efficiency, location and various other factors. It is
advisable to avoid exposure to high volume levels, which
occurs whilst turning the sound bar on with the volume
control setting up high, or whilst continually listening at high
volumes.