Keyless Entry; Trunk Release; Remote Starting The Vehicle - Code Alarm CA 500 Owner's Manual

Audiovox ca500 car alarms: owners manual

Hide thumbs Also See for CA 500:

Table of Contents

KEYLESS ENTRY:

The LOCK button on the transmitter is used to lock the vehicle's doors, the

UNLOCK button is used to unlock the vehicle's doors. To lock or unlock the

doors simply press and release the desired function button one time. For

your convenience, the parking lights will flash once when the doors are

locked and twice when the door are unlocked.

The TRUNK button on the transmitter is used to open the trunk of the

vehicle. To open the vehicle's trunk PRESS and HOLD the TRUNK button for

3 seconds.

The system WILL NOT start the vehicle if any one of the following situations

exist:

1. The vehicle's hood is opened.

2. The gear shift selector is not in Park.

3. The brake pedal is depressed.

4. The safety control switch is in the OFF position.

1. To start the vehicle, press and release the "STAR" button on the

transmitter 2 times* within 2 seconds. The vehicle will start and remain

running for the pre-programmed 5,10,15,20 minute run cycle. As a visual

indication, the parking lights will flash or remain on depending on the

setting by your installation center.

2. When you arrive at the vehicle, turn the ignition key to the ON position

(Do not try to restart the vehicle), then step on the brake pedal to disengage

the remote start.The vehicle will continue to run, but now on it's own power.

* NOTE: Remote Start activation can be configured for single or double

press, refer to the programable features section of the installation manual.

2 of 2

Table of Contents

Do you have a question about the CA 500 and is the answer not in the manual?