MULTIPURPOSE WORKOUT BAR
MODEL# 8633WB
PRODUCT MANUAL VERSION# 03.16.03
HARDWARE & TOOLS:
1
Side Cross Bar (2 pcs)
2
Mid Cross Bar (1 pc)
ASSEMBLY INSTRUCTIONS:
Step 1
Insert Side Cross Bars (#1) into Mid Cross
Bar (#2) and line up the screw holes.
Step 2
Use two screws M6 x 0.59"/15mm (#7). Secure
screws using Screwdriver/Wrench Tool (#10)
Step 3
Attach the Curved Bars (#3) to the assembled Cross Bar as
shown, using 2x Bolts M6 x 2.16"/ 55mm (#5), 2x Washers (#9)
and 2x Plastic Nut Caps (#8) on each Curved Bar. Secure using
the wrench end of the Screwdriver/Wrench Tool (#10)
3
Curved Bars
9
Washer
8
Knob
This product is to be used on a sturdy wall frame with a minimum width of 27.56" to a
maximum width of 32.71", and a minimum depth of 4.33" to a maximum depth of 6.3".
Do not set up in a door frame out of this range, and ensure both sides of cross bar and
plastic rail lay against door frame securely while in use at pull-up position.
Maximum Weight Capacity: 250 lbs
3
1A
Side Cross Bar
Curved Bars (2 pcs)
Foam Pad (2 pcs)
[Pre-Installed]
2A
Mid Cross Bar
Foam Pad (4 pcs)
[Pre-Installed]
5
Bolt - M6 x 2.16"/55mm
9
Washer
8
Knob
3A
Curved Bar Short
Foam Pad (2 pcs)
[Pre-Installed]
Curved Bar Long
3B
Foam Pad (2 pcs)
[Pre-Installed]
4
Plastic Stop Rail (1 pc)
Line up holes
1
Side Cross Bar
10
Screwdriver/Wrench Tool
7
Screw - M6 x 0.59"/ 15mm
Step 4
Attach the Plastic Stop Rail (#4) to both Curved Bars (#3), using 2x
Bolts M6 x 1.77"/ 45mm (#6), 2x Washers (#9) and 2x Plastic Nut
Caps (#8). Secure the Knobs side using the Screwdriver/Wrench
Tool (#10)
8
Knob
9
Washer
Minimum Doorway Depth
4.33" (11 cm)
5
6
7
8
9
5
Bolt - M6 x 2.16"/ 55mm (2 pcs)
6
Bolt - M6 x 1.77"/ 45mm (2 pcs)
7
Screw - M6 x 0.59"/ 15mm (4 pcs)
8
Plastic Nut Knob (4 pcs)
9
Washer (4 pcs)
10
Screwdriver/Wrench Tool (1 pc)
11
Plastic Plug (6 pcs)
[Pre-Installed]
Line up holes
1
Side Cross Bar
2
Mid Cross Bar
8
Knob
9
Washer
4
Plastic Stop Rail
6
Bolt - M6 x 1.77"/45mm
Maximum Doorway Depth
6.3" (16 cm)
10
11
Need help?
Do you have a question about the 8633WB and is the answer not in the manual?
Questions and answers