Table of Contents
Advertisement
Session
1
information
Viewer
2
Encoder
3
options
NAVIC name
4
Encoder
5
position
display
Video record
6
Snapshots
7
To begin recording video, a
session must be created. When
the system is first powered on, No
Session Active will be displayed.
The session entry dialogue also
appears if the video record button
is pressed when No Session
Active is displayed.
Once a session is created, video
and images can be saved using
the video record and snapshot
buttons.
View screen for camera and
playback screen.
Pull down for encoder options.
Tap NAVIC button to access
additional options.
The encoder position of the
crawler and any attached
accessory will display here.
NOTE:
When setting the encoder
position to zero on the
handheld controller, ensure
the encoder position is also
reset by the user within the
RECON • Studio application.
The encoder data on the
handheld controller is
independent of the RECON.
Press to begin recording video
signals.
Press at any time to capture a still
photograph.
PAGE 25 of 35
DW0014 Rev 00.1
Advertisement
Table of Contents
