Table of Contents
Advertisement
5.5. Attaching Satellite Camera
WARNING!
LOAD. Shut off power before connecting or
disconnecting the RECON. Permanent damage to
electronics could occur.
Using the dual camera bracket
(Fig. 26), follow the preceding
steps to attach the satellite
camera.
1. Attach the satellite camera
to the dual camera bracket
(see "Attaching Camera"
on page 16).
2. Adjust the angle of the satellite camera (Fig. 27) as
required (see "Attaching Camera" on page 16).
DO NOT DISCONNECT UNDER
Fig. 27 - Satellite camera attached to dual camera bracket
PAGE 21 of 35
Fig. 26 - Dual camera bracket
DW0014 Rev 00.1
Advertisement
Table of Contents
