Advertisement
YOUR " ANTI -CODE GRABBING " TRANSMITTERS
The transmitters included with your new remote start system use the most ad-
vanced and secure form of radio frequency transmission available on any current
automotive remote system. Some of today's sophisticated auto thieves use a device
known as a code grabber, which will receive and store the signal from your keychain
transmitter, and re-transmit it at a later time to disarm your system.
Your anti-code grabbing transmitters will change their signal every time the button is
pressed, so when a thief grabs then re-transmits your signal, the alarm system will
not respond.
If your transmitter button is pressed more than fifty times while it is out of range of
the vehicle ( children playing with your keys ), the transmitter will not operate when
you return to the vehicle and will need to be re-aligned to the receiver. To do this,
simply press button 1 two times within a one second time period. The system will
now respond to that transmitter each time a button is pressed.
For reference the transmitter packaged with your AA-RS30CS is shown with num-
bers referring to the text below.
KEYLESS ENTRY
1. To lock or unlock the doors simply press and release button 1 on the key-
chain transmitter. As a keyless entry unit, for your convenience, the park-
ing lights will flash once when the doors are locked and twice when the
door are unlocked. If the optional illuminated entry feature has been added,
the interior light will turn on when the doors are unlocked and remain on
for 30 seconds or until the ignition is turned on.
ADDITIONAL REMOTE FUNCTION (CHANNEL 2)
This system has an additional feature that can be connected to a number of different
optional accessories. Some of the more common uses for this channel are;
o Remote Trunk Release
o Remote Window Closure
o Remote Garage Door Interface
To activate the optional accessory, press and hold button 2 on the keychain trans-
mitter for 4 seconds.
NOTE:The feature that has been added to channel 2 will always be activated using
the same transmitter button that remotely starts the vehicle. There is no way
to move the channel 2 function to a different transmitter button.
ADDITIONAL REMOTE FUNCTION (CHANNEL 3)
This system has an additional feature that can be connected to a number of differ-
ent optional accessories. Some of the more common uses for this channel
are;
o Remote Trunk Release
o Remote Window Closure
o Remote Garage Door Interface
To activate the optional accessory, press button 3 on the keychain transmitter. The
optional accessory will immediately engage.
Page 2
Advertisement
