Audiovox AA-95BT3S Programming Manual

The transmitters included with the system have been pre-programmed at the
factory, with each button pre-assigned to control a specific function of the system.
Although the system in the vehicle has either a 2, 3 or 4 channel RECEIVER,
depending on the model, the transmitters included with the system are 7 channel
transmitters. This allows you to program each transmitter to more than one
vehicle in two car families, and also allows you to change which button or buttons
control certain functions of the system. (Example: Transmitter channel 5, shown
below, can be programmed to activate Receiver channel 2.) Refer to the chart
below for access to each of the transmitter channels, and for the standard factory
button assignments.
TRANSMITTER
CHANNEL BUTTONS CHANNEL
1 1 1
2 2 2
3 3 3
4 1&2 4
5 2&3 -
6 1&3 -
7 1&2&3 -
* Remote Emergency Panic is available only on certain models.
* Door Lock/Unlock may require additional components in certain vehicles.
** Some of the more common accessories for these additional channels are;
AS 9153 Remote window roll up
AS 9256 Remote trunk release relay
TRANSMITTER PROGRAMMING GUIDE
Model : AA95BT3/AA-95BT3S
SYSTEM RECEIVER
FUNCTION
Remote Arm & Disarm
*Remote Emergency Panic
*Remote Door Lock & Unlock
Push And Hold For 3 Seconds For Trunk
Release, Push 2 Times For Remote Start.
** Pulsed Output for Accessories
** Switched Output for Accessories
-
1
-
-
-
2
3