Carrier 38MARBQ12AA1 Service Manual page 91

PCB Board 2
Procedure
1) Remove the compressor capacitor
securing screw then pull it out.
2) Remove the transformer's screws (2)
and then remove it.
3) Remove the fan motor capacitor
screws , then remove it.
4) Remove the electronic installing box
screws (4) and then remove it.
5) Remove the AC contactor screws (2)
and then remove it.
SG-38MARB-01
Illustration
Fan motor capacitor
Specifications subject to change without notice.
Compressor capacitor
91