Audiovox FR-200 Owner's Manual page 5

1. Power Button: Press and hold this button for 2 seconds to turn the
transceiver on or off.
2. Push-to-Talk Button: Press to transmit. Release to
receive.
3. Monitor Button: Press and hold to bypass the squelch and
listen to channel activity.
4. Belt Clip
5. Battery Compartment
6. Speaker
7. Microphone
8. Call Button: Press and hold this button to send a ringing sound to
other radios tuned to the same channel.
9. Up Button: Press this button to increase the volume.
10. Down Button: Press this button to decrease the volume.
11. Low Battery Indicator: Illuminates when the battery level is
low.
12. Transmit Indicator: Illuminates while transmitting.
13. Antenna: Rotate counterclockwise when transceiver is in use
14. Microphone / Charger Jack: For use with an external micro
phone / PTT button and optional battery charger.
15. Speaker Jack: For use with an Audiovox approved headset
accessory only.
16. Channel Select Switch: Selects channel of operation
-3-
128-5551D
5 of 12