Battery Usage; Battery Installation; Battery Removal; Battery Charging - Audiovox CDM-8150 User Manual

BATTERY USAGE

BATTERY INSTALLATION

C
H
u
1
1
Place the battery on the back of the handset
and slide it down into place.
battery down until it locks into place.
u
v

BATTERY REMOVAL

u
1
Pull down the release latch, lift up the
v
battery, and remove the battery from the
handset.
Securely place the battery to avoid slipping off during a call.
Turn off the phone before removing the battery to avoid
losing any unsaved features and messages.
10

BATTERY CHARGING

POWER CONNECTION

v
Push the
1 Connect the AC adapter to the desktop holder
and plug it into the outlet.
l The red LED indicates charging is in progress.
l The green LED indicates charging is completed.
Fully charge the battery before using – it is not charged when
purchased.

CHARGING THE BATTERY WITH THE HANDSET

1 Place the handset (with battery attached) into
the charger.
• It is more efficient to charge the battery with the phone
turned off.
• If the red LED does not illuminate when charging, check
the power connection and make sure the handset is
securely in place.
BATTERY USAGE
2
1
11
C
H
1