Battery Usage; Battery Installation; Battery Removal; Battery Charging - Audiovox TX-120C Manual

BATTERY USAGE

C
GPS Icon
H
Location On
1
GPS Icon
911 Only
1X
Phone is in the 1x service area.
Pause

BATTERY INSTALLATION

u
1
Place the battery on the back of the handset
v
and slide into place. Push the battery down
until it locks into place.

BATTERY REMOVAL

u
1
Pull down the release latch, lift up the battery
v
and remove the battery from the handset.
Make sure the battery is securely placed to avoid detaching
from the phone.
10
BATTERY USAGE

BATTERY CHARGING

POWER CONNECTION

1
Plug the AC charger into a standard outlet.
u
v
l The red LED indicates charging is in progress.
l The green LED indicates charging is completed.
Fully charge the battery before using – it is not charged
when purchased.

CHARGING THE BATTERY WITH THE HANDSET

Attach the handset (with battery attached) to
1
the charger.
• It is more efficient to charge the battery with the phone
turned off.
• If the red LED does not illuminate when charging, check
the power connection and make sure the handset is
securely in place.
11
C
H
1