Flat Strong Box; Flat Surface Mounted Push Button; Assembly Accessories; Couple Of Half Bearing Of Reduction - RIB Jolly 20 Manual

F
LAT STRONG BOX
Safety box preventing the access to controlling devices.
Supplied as a standard, with toggle switch (open-close) and electric brake
release system.
Of die-cast aluminium - IP54.
F
LAT SURFACE MOUNTED PUSH BUTTON
OPEN/CLOSE
Control for any type of automation.
It is equipped with two microswitches with contacts 15A 250V.
Dim.: 59,5x82,5x29
K
EY SELECTORS
Control for any type of automation.
Equipped with two microswitches with N.O. contacts of 15A 250V (Open/
Close) and one switch with N.C. contact of 4A 250V (Stop).
The selector can be opened only with the operating key.
IP54
- EMBEDDED WITHOUT STOP dim.: 100x100x109
- TO WALL WITHOUT STOP dim.: 100x100x42

ASSEMBLY ACCESSORIES

C
OUPLE OF HALF BEARING OF REDUCTION
Utilized to mount JOLLY motors 20-22-22 Super on shafts of smaller
diameter. In nylon.
- Dim. = Ø 42/48
- Dim. = Ø 42/60
- Dim. = Ø 48/60
F
IT SLIM
PHOTOCELLS for the wall-installation
PAIR OF COLUMNS FOR FIT SLIM
FIT SLIM photocells have synchronism function in AC current and
code ACJ9071 ranges of 20 m.
You can fit many photocell couples close together thanks to the optional
synchronizing circuit SYNCRO TRANSMITTER TX SLIM SYNCRO
code ACG8029 for more than 2 photocells couples (up to 4).
S
PARK
In order to make the systems mentioned above give the best
performances, you need to install an antenna tuned on the frequency
of the radio receiver installed. N.B. Pay attention to not let the central
code ACG2012
wire of the cable to came Into contact with the external copper
sheath, since this would prevent the antenna from working.
Install the antenna vertically and in such a way the remote control can
reach it.
SPARK BLINKER WITH IN-BUILT INTERMITTENT CARD
LATERAL SUPPORT
SPARK ANTENNA 91
SPARK ANTENNA 433
R
ADIO TRANSMITTER MOON
code ACG1010
code ACG6081
code ACG1030
C
OMPENSATION FLANGES
They are assembled on the sides of the spring-boxes with smaller
diametre to allow assembly of JOLLY 22 and 22 Super.
code ACJ9030 In iron plate.
code ACJ9040 Dim. = Ø 220x8
code ACJ9050
1
1
MOON 433
code ACG6082
G
B
code ACG8032
code ACG8065
code ACG7059
code ACG7042
code ACG5454
code ACG5452
MOON CLONE
code ACG6093
code ACJ9060