1. Manuals
  2. Brands
  3. AVANT Manuals
  4. Compact Loader
  5. A2868
  6. Operator's manual for attachment

AVANT A2868 Operator's Manual For Attachment

Silage forks for 300-700-series loaders
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Operator's manual for Attachment
Operator's
Operator's
Operator's
Product number:
Please read this manual carefully before using the equipment, and follow all
instructions.
Keep this manual for later reference.
manual for Attachment
manual for Attachment
manual for Attachment
Silage forks
300-700-series loaders:
Feeding table cleaning blade: A2936
Silage Forks 2012 1
A2868
A31512
A31519

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the A2868 and is the answer not in the manual?

Questions and answers

Related Manuals for AVANT A2868

Summary of Contents for AVANT A2868

  • Page 1 Operator’s manual for Attachment manual for Attachment Silage forks Product number: 300-700-series loaders: A2868 A31512 A31519 Feeding table cleaning blade: A2936 Please read this manual carefully before using the equipment, and follow all instructions. Keep this manual for later reference.

  • Page 2: Table Of Contents

    Silage Forks 2012 1 CONTENTS Foreword..........................3 Designed purpose of use ......................3 Safety instructions for the silage forks ..................3 Safety instructions for installing hydraulic components............5 Silage fork specifications......................6 Assembling the silage forks..................... 7 6.1. Attaching the silage forks to the loader .................... 6.2.

  • Page 3: Foreword

    3(18) 1. Foreword Avant Tecno Oy would like to thank you for your purchase of this AVANT attachment. It has been designed and manufactured on the basis of years of product development and experience. By familiarising yourself with this manual and following the instructions, you ascertain your safety and ensure the reliable operation and long service life of the equipment.
  • Page 4 4(18) • Start operating with the silage forks after they are properly assembled and attached. Carefully read the instructions of how to assemble and attach the silage forks to the loader. • When attaching the attachment to the loader, ensure that the locking pins of the loader's quick attach plate are in the lower position and that they have locked the attachment to the loader.

  • Page 5: Safety Instructions For Installing Hydraulic Components

    The following safety procedures must be followed when handling hydraulic components. Contact your nearest Avant dealer or service point if you have any additional questions or if you need installation services. It is recommended to leave the installation of hydraulic components to professional service technicians.

  • Page 6: Silage Fork Specifications

    Spare part number for 63990 (5 pcs) 63990 the lower tines: A44511 (2 pcs) 300-700 series Suitable AVANT loaders* *for 500-700-series loaders only with adapter plate A34037 Note that the adapter plate A34037 must be used when operating the silage forks...

  • Page 7: Assembling The Silage Forks

    The attachment is attached to the AVANT loader boom quick attach plate and the counterpart on the attachment. The locking is semi-automatic; the locking latches are released as the locking pins hit the pin guides when the boom front plate is tilted towards the loader.
  • Page 8 8(18) Step 2: • Turn the quick attach plate hydraulically to an obliquely forward position. • Drive the loader onto the attachment. If your loader is equipped with a telescopic boom, you can utilise this. Step 3: • Turn the boom control lever left to turn the bottom section of the quick attach plate onto the attachment.

  • Page 9: Installing The Hydraulic Hose Kit And Testing Operation

    9(18) 6.2. Installing the hydraulic hose kit and testing the operation Check that the hydraulic quick couplings in the separate installation kit are the same type as the loader quick couplings. Attach the attachment to the loader as shown on previous pages before assembling the hydraulic components.
  • Page 10 10(18) Assembling the hydraulic hoses to silage forks 1. Choose a level, well lit, and clean area for installation. Lower the attachment completely on the ground or on a pallette, shut down the loader engine and release any residual hydraulic pressure. Also remember safety instructions from pages 4 and 5.

  • Page 11: Tightening Hydraulic Fittings

    11(18) A sufficient free length (about 125 cm) must be left in between the hose clamp and the hydraulic couplings, so that the attachment can be moved and tilted in all positions of the boom. After installation, test movements of the loader boom as shown on page 12. 7.

  • Page 12: Test The Movements Of The Loader Boom And The Attachment

    12(18) Test the tightness of the hydraulic fittings carefully. Use idle rpm when starting the first time and keep a safe distance due to the risk of hydraulic fluid ejection. Shut down the loader and release the residual pressure before checking for leaks. Never test the tightness of the hydraulic components by placing hands near the fittings.

  • Page 13: Operation

    13(18) Connecting the multiconnector system: Align the pins of the attachment connector with corresponding holes of the loader connector. The multiconnector will not connect if the attachment connector is upside down. Connect and lock the multiconnector by turning the lever towards the loader. The lever should move easily all the way to its locking position.

  • Page 14: Feeding Table Cleaning Blade (Optional Extra)

    14(18) When lifting a load from a high level, the loader could tip forward when reversing with the loader. Do not reverse the loader while simultaneously dragging the load. Make sure that the loader can lift and handle the load being lifted. Drive carefully on slopes, rough or inclined terrains.

  • Page 15: Inspections, Maintenance And Servicing

    If there are signs of leaking, to check the component, hold up a piece of cardboard in the area where a leak is suspected. Finding any of these faults means that the hydraulic hose or component in question must be replaced. Spare parts are available from your nearest AVANT retailer or service point.

  • Page 16: Cleaning The Equipment

    Only add the grease amount of a couple of grease press pushes at a time. 9. Warranty terms Avant Tecno Oy grants a warranty of one year (12 months) for the attachment from the date of purchase. The warranty covers repair costs as follows: •...
  • Page 17 SFS-EN ISO 12100, SFS-EN 982, ISO 4254-1 Kuvaus: Avant-kuormainten kanssa käytettävä hydraulitoiminen tuorerehupihti Beskrivning: Hydraulisk fodergrep; arbetsredskap för Avant lastare Description: Hydraulic silage fork; attachment for Avant loaders Heu-/Silogreifer Beschreibung: Hydraulische ; Anbaugerät für Avant Radlader Mallit / Modeller / Models / Modellen:...

This manual is also suitable for:

A31512A31519

Table of Contents