Radio Operation; Tuning Into A Station Manually; Fm Stereo; Weak Fm Stations - Audiovox DV1530 Owner's Manual

Tuning into a station manually

1.Press FUNCTION button on the remote or TUNER button
on the front panel until the frequency band appears on
the display.
2. Press the BAND button on the remote remote or
button on the front panel to select the desired band.
3.Press the TUNING
station.

FM Stereo

• Press the FM MODE button on the remote until "

Weak FM stations

• Press the FM MODE button on the remote until the "
be reduced but the signal reproduced will be mono. To restore stereo reception, press the FM MODE button on the
remote to select STEREO.
Note:
• The left / right front speakers and subwoofer are activated only.

To search for a station automatically

• Hold down the TUNING
and a station is searched for automatically. After tuning in a station, the search stops.
• The search may not stop at a station with a very weak signal.

Presetting stations

You can tune into a stored station directly by entering the preset number.
20 stations on FM band can be preset.
20 stations on AM band can be preset.
1. Press FUNCTION button on the remote or TUNER button on the front panel until the frequency band appears on
the display.
2. Press the BAND button on the remote to select the desired band.
3. Use the TUNING
4. Press the MEMORY button on the remote.
5. Press the NEXT or PREV
to store the station.
6. Repeat steps 2-5 to store other stations.

Tuning into a preset station

1. Press TUNER button on the front panel until the frequency band appears on the display.
2. Press the BAND button on the remote to select the desired band.
• Press the PLAY button and
buttons to enter the number to select the presetted station.
Example: To select preset number 15, press the +10 and 5 buttons.
To select preset number 10, press the +10 and 0 buttons.

Radio Operation

button to tune in the desired
buttons on the remote or
button to find your desired station.
button to select the preset number and press the MEMORY button on the remote
NEXT or PREV
STOP
" appears on the display.
" word appears on the display. Background noise will
SKIP buttons on the front panel for 1 to 2 seconds,
button to select the presetted station or use the numbered
E - 31