Radio Operation; Tuning Into A Station Manually; Fm Stereo; Weak Fm Stations - Audiovox DVD Home Theatre System CD-R/RW CD Playback Owner's Manual

Tuning into a station manually

1.Press the FUNCTION button until the frequency band
appears on the display.
2. Press the BAND button on the remote remote or
STOP button on the front panel to select the desired
band.
3.Press the TUNING button to tune in the desired station.

FM Stereo

• Press the FM MODE button on the remote until "
" appears on the display. .

Weak FM stations

• Press the FM MODE button on the remote until the "
" word appears on the display. Background
noise will be reduced but the signal reproduced will be
mono. To restore stereo reception, press the FM MODE
button on the remote to select STEREO.
Note:
• The left / right front speakers and subwoofer are activated only.

To search for a station automatically

• Hold down the TUNING
station, the search stops.
• The search may not stop at a station with a very weak signal.

Presetting stations

You can tune into a stored station directly by entering the preset number.
20 stations on FM band can be preset.
20 stations on AM(MW) band can be preset.
1. Press the FUNCTION button until the frequency band appears on the display.
2. Press the BAND button on the remote to select the desired band.
3. Use the TUNING button to find your desired station.
4. Press the MEMORY button on the remote.
5. Press the NEXT or PREV
to store the station.
6. Repeat steps 2-5 to store other stations.

Tuning into a preset station

1. Press the FUNCTION button on the front panel until the frequency band appears on the display.
2. Press the BAND button on the remote to select the desired band.
• Press the PLAY Y button and
buttons to enter the number to select the presetted station.
Example: To select preset number 15, press the +10 and 5 buttons.
To select preset number 10, press the +10 and 0 buttons.
28.pmd

RADIO OPERATION

buttons on the remote, and a station is searched for automatically. After tuning in a
button to select the preset number and press the MEMORY Y button on the remote
NEXT or PREV button to select the presetted station or use the numbered
E - 28
28
(continued on next page)
4/26/2004, 12:56 PM