continuously. If you experience a loss of signal
or audio, reposition the antenna inside the
home or outside as necessary.
3. Installing the Xpress In the Cradle
Install the Xpress Receiver in the docking station
as follows:
DOCKING
STATION
TOP VIEW
DOCKING
STATION
FRONT VIEW
CONNECTOR
DOCKING
GUIDE PIN
STATION
REAR VIEW
16-PIN
SYSTEM
CONNECTOR
AUDIO OUT
CONNECTOR
-7-
a. After making sure the connectors and guide pin
hole are properly lined up, gently lower the
Xpress Receiver into the cradle and gently press
down on the Xpress Receiver to mate the
connectors together.
b. The Xpress Receiver should now be nestled
securely in the docking station.
ANT IN RF
CONNECTOR
DC IN
CONNECTOR
128-7476
7 of 12