Wired Headphones - Audiovox VOD702 Operation Manual

Wired Headphones

There are two 1/8" headphone jacks on the VOD702 that can be used with any standard wired stereo headphones.
These jacks are controlled by the volume up / down buttons on the VOD702 remote control.
Wired FM Modulator
The VOD702 is equipped with an RF modulator, that allows you to listen to the VOD702 audio signal by tuning your
vehicle's radio to the selected frequency, (88.3, 88.7, 89.1, 89.5, 89.9, 90.1MHz). This feature is accessed by using
either the FM transmitter buttons on the remote (On/Off, Select). Whenever the RF modulator is on, broadcast reception
on the vehicles radio will be poor. Switching off the FM modulator will allow normal radio reception.
AV1 Input
The video inputs may be connected to a Video cassette Player (VCP), video game system, or other audio / video
devices. To access the A/V input, turn the VOD702 on and press the source button on the VOD702 or the Source
button on the remote control until "AV1" is displayed on the screen. Turn the video source component on with its power
button or remote control. The VOD702 is now ready to play the audio and video signals from the source connected to
AV1 inputs.
AUX A/V Input
Using the supplied adapter (P/N 112B3227) the VOD702 will accept an audio / video input through the 1/8" jack located
on the side of the unit. The audio / video device could be a video game system, video camera, or other input device.
Video Out
The VOD702 provides a video output for an optional video monitor(s). (Refer to page 6 of the Installation Guide for
more details.) This output will provide a video signal that duplicates the signal displayed by the VOD702 to an additional
monitor or video display. Please see your installer for more information.
- -
16