Table of Contents
Advertisement
Pack201 | Preface | Section 1
1.2 Machine Specifications
1.2.1 Electrical
The standard wrapper's electrical requirements are as
follows:
•
230 VAC ±10%, 3 phase, 50/60 cycle
•
Dedicated line from service entry
•
Green wire tied directly to earth ground at service
entry
•
No other equipment may use the ground wire
There are several ways that the machine can be
connected to the power source. Consult a qualified
electrician to make this decision�
1.2.2 Air Supply
The wrapper requires 6 bar, 80PSI minimum�
1.2.3 Weight
The weight of the machine, including its standard
features, is approximately 4000 pounds without the
infeed�
1.2.4 Noise Level
The noise generated by the machine when it is running
is less than 80 decibels�
1.2.5 Speed
The speed at which the wrapper can wrap product
depends in part on the type and diameter of the
crimper�
•
Maximum 1-up (1 crimper per shaft) capacity is
150 packages per minute�
•
Maximum 2-up (2 crimpers per shaft) capacity is
250 packages per minute�
1.2.6 Maximum Film Size
The maximum reel diameter is 400 mm; the maximum
reel weight is 35 kgs, and the maximum film width is
650 mm�
© Bosch Packaging Technology, Inc.
All rights reserved 2012
1.2.7 Max Min Package Length
Crimper Dia�
Length
# Crimpers
Range
100mm 1 up
140-310mm
(3�9")
(5�5"-12�2")
100mm 2 up
85-155mm
(3�9")
(3�35"-6�1")
120mm 1 up
170-375mm
(4�7")
(6�7"-14�75")
120mm 2up
90-185mm
(4�7")
(3�5"-7�25")
150mm 1up
200-470mm
(5�9")
(8�25"-18�5")
150mm 2up
110-235mm
(5�9")
(4�3"-9�25")
180mm 1up
250-565mm
(7�0")
(9�8"-22�25")
180mm 2up
130-280mm
(7�0")
(5�1"-11�1")
1.2.8 Dimensions
Dimensions given are approximate� Machine options
and associated equipment will vary�
Machine length: Approximately 1500 mm (excluding
the infeed
Machine width: Approximately 550 mm
Machine height: Approximately 1500 mm
EN | 4
Max
Height
45mm
(1�75")
45mm
(1�75")
65mm
(2�5")
65mm
(2�5")
95mm
(3�75")
95mm
(3�75")
115mm
(4�5")
115mm
(4�5")
Hide quick links:
Advertisement
Chapters
Table of Contents
