Safety Guidelines - JBL SA750 Handbook

Integrated amplifier
Hide thumbs Also See for SA750:
Table of Contents

Advertisement

SAFETY GUIDELINES

Important Safety Instructions
Read these instructions.
1. Keep these instructions.
2. Heed all warnings.
3. Follow all instructions.
4. Do not use this apparatus near water.
5. Clean only with dry cloth.
6. Do not block any ventilation openings. Install
in accordance with the manufacturer's
instructions.
7. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
8. Do not defeat the safety purpose of the
polarized or grounding-type plug.
A polarized plug has two blades with one
wider than the other. A grounding type plug
has two blades and a third grounding prong.
The wide blade or the third prong are provided
for your safety. If the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
9. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
10. Only use attachments/accessories specified
by the manufacturer.
11. Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus.
When a cart is used, use caution
when moving the cart/apparatus combination
to avoid injury from tip-over.
12. Unplug this apparatus during lightning storms
or when unused for long periods of time.
EN-2
13. Refer all servicing to qualified service
personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-
supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally,
or has been dropped.
14. Object or liquid entry
WARNING – Take care that objects do not fall
and liquids are not spilled into the enclosure
through any openings. The equipment shall
not be exposed to dripping or splashing.
Liquid-filled objects such as vases should not
be placed on the equipment.
15. Climate
The equipment has been designed for use in
moderate climates and in domestic situations.
16. Cleaning
Unplug the unit from the mains supply before
cleaning.
The case should normally only require a wipe
with a soft, lint-free cloth. Do not use chemical
solvents for cleaning.
We do not advise the use of furniture cleaning
sprays or polishes as they can cause
permanent white marks.
17. Power sources
Only connect the equipment to a power
supply of the type described in the operating
instructions or as marked on the equipment.
The primary method of isolating the equipment
from the mains supply is to remove the mains
plug. The equipment must be installed in a
manner that makes disconnection possible.
18. Abnormal smell
If an abnormal smell or smoke is detected
from the equipment, turn the power off
immediately and unplug the equipment from
the wall outlet. Contact your dealer and do not
reconnect the equipment.
19. Damage requiring service
The equipment should be serviced by qualified
service personnel when:
A. The power-supply cord or the plug has
been damaged, or
B. Objects have fallen, or liquid has spilled
into the equipment, or
C. The equipment has been exposed to rain,
or
D. The equipment does not appear to
operate normally or exhibits a marked
change in performance, or
E. The equipment has been dropped or the
enclosure damaged.
CAUTION: To reduce the risk of electric shock, do
not remove cover (or back). No user serviceable
parts inside. Refer servicing to qualified service
personnel.
WARNING: To reduce the risk of fire or electric
shock, do not expose this apparatus to rain or
moisture.
The lightning flash with an arrowhead
symbol within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated 'dangerous voltage' within the
product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an
equilateral triangle is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying the
product.
CAUTION: In Canada and the USA, to prevent
electric shock, match the wide blade of the plug to
the wide slot in the socket and insert the plug fully
into the socket.
Class II Product
This equipment is a Class II or double insulated
electrical appliance. It has been designed in such
a way that it does not require a safety connection
to electrical earth ("ground" in the U.S.)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents