Network Settings - JBL SA750 Handbook

SETUP MENU
See "SA750 DIGITAL FILTERS" on page EN-19
for more explanation on the differences between
the filters.

Network Settings

Network Info
Displays the units wired and wireless MAC
address, IP address and friendly name and host
name.
Net Standby
Enables or disables the network control of the
SA750 while the unit is in standby. The default
setting is .
Note: The unit can still be controlled via RS232
commands, even when network standby is
disabled.
RS232 Standby
Enables or disables the RS232 control of the
SA750 while the unit is in standby. The default
setting is .
C4 SDDP
Enables the Control 4 discovery function and
enables the sending of a discovery beacon.
EN-18