Table of Contents
Advertisement
LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select
the Balance mode by pressing the SEL button
that the BAL indication appears on the display panel.
Within 5 seconds of choosing the Balance mode,
press the VOL
or VOL
2
Control
to adjust the balance as desired. The
balance position will be shown on the display panel
from BAL.L 16 (full left) through BAL.R 16 (full right).
When the volume level between the left and right
speakers is equal, BAL 00 will be shown on the
display panel. The display will automatically return
to the normal indication 5 seconds after the last
adjustment or when another function is activated.
FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select
the Fader mode by pressing the SEL button
that the FAD indication appears on the display panel.
Within 5 seconds of choosing the Fader mode, press
the VOL
or VOL
button of the Volume Control
2
to adjust the front-rear speaker balance as de-
sired. The fader position will be shown on the dis-
play panel from FAD.R 16 (full rear) through FAD.F
16 (full front). When the level between the front and
rear speakers is equal, "FAD 00" will be shown on
the display panel. The display will automatically
return to the normal indication 5 seconds after
the last adjustment or when another function is
activated.
LOUDNESS CONTOUR (LOUD)
When listening to music at low volume levels, this
feature will boost the bass and treble ranges to
compensate for the characteristics of human
hearing. Press the LOUD button to activate this
feature and the indication LOUD will appear on the
display panel. Pressing the button again will
deactivate the feature (the LOUD indication will
disappear from the display panel).
AUDIO MUTE (MUTE)
This button is used to mute the volume from the
system. By pressing the button, a flashing MUTE
indication will appear on the display panel and the
volume will be muted. Pressing the Mute button again,
or activating the Volume Control
3
button
, LOUD button, or Equalizer (EQ) button
will return the volume level to the setting in use be-
fore the Mute function was activated.
AM/FM BAND SELECTOR (BAND)
During radio operation, each momentary press of
this button will change the radio band. The indication
AM1, AM2, FM1, FM2, or FM3 will appear on the
3
display panel according to your selection.
so
During disc play, pressing this button will stop play
of the disc and switch to radio operation without
button of the Volume
ejecting the disc. During this time, the
indication will remain on the display panel to show
that a disc is still loaded in the unit. Press the
"Mode" button
beginning of the last track in play.
Each time the
one frequency step higher. Similarly, each tap of the
manually tune in a station, tap the button of the
3
so
appropriate direction until the desired frequency is
reached.
Pressing either button for longer than 2.0 seconds
and then releasing will activate the Automatic Seek
Tuning function. The radio will seek the next available
station and stop at that frequency. The Seek function
can be stopped by pressing the button again or
activating any other tuning function.
PRE-SET SCAN TUNING (PS)
During radio operation, press this button momen-
tarily to scan the 6 stations pre-set into the memo-
ries of that band. The unit will stop at each pre-set
station for 5 seconds before continuing to the next
pre-set station. During this time, the pre-set station
number (CH) in the band will flash. Press the button
again momentarily to stop Pre-Set Scan operation
and remain on the selected frequency. The station
number (CH) stops flashing.
Pressing the button for longer than 2 seconds will
activate the Auto-Store Tuning feature which will
automatically scan the band and enter up to 6 strong
stations into the 6 pre-set memories. After entering
the stations into the memories, the unit will automatically
stop at each station for 5 seconds so each can be
heard. If you have already set the pre-set memories
to your favorite stations, activating the Auto-Store
feature will erase those stations and enter the new
2
strong stations. This feature is most useful when
, Select (SEL)
travelling in a new area where you are not familiar
with the local stations.
To set any of the 6 pre-set memories in each band,
use the following procedure:
cr
to return to disc play from the
CONTROL-MANUAL UP/DOWN TUNING
(
/
) AUTOMATIC SEEK TUNING
button is tapped, the radio will tune
button will tune one frequency step lower. To
AUTO-STORE TUNING (AS)
STATION PRE-SET MEMORIES
IN
6 6 6 6 6
Advertisement
Table of Contents
