Audiovox ACD-23 Owner's Manual page 13

Audiovox acd-23: owners manual
Table of Contents

Advertisement

by pressing the RPT button twice or by activat-
ing the Scan or Random Play functions, or by
pressing the MODE switch. When the RPT but-
ton is pressed twice during Disc Changer opera-
tion, the DISC and RPT indications will appear on
the display panel and play of the selected disc will
be continually repeated until the Disc Repeat
mode is canceled by pressing the RPT button
dr
twice, or by activating the Intro-Scan
dom Play
functions, or by pressing the MODE
dr
switch.
DISC/TRACK RANDOM PLAY (RND)
During disc player operation, when the RND
button is pressed, the RND indication will appear
on the display panel and the tracks on the disc
dn
will be played in a random shuffled order. The
Track Select button
will also select tracks in
the shuffled order instead of the normal
progression. The Random Track mode can be
canceled by pressing the RND button twice or by
activating the Repeat Play or Intro-Scan functions,
or by pressing the MODE switch.
If a problem should develop while operating the CD changer, the following error codes may
appear on the display panel:
ER-1: Indicates that there is no magazine loaded in the CD changer.
ER-2: Indicates a problem with the magazine eject function.
ER-3: Indicates an error in the disc loading function.
ER-4: Indicates an error in the disc unloading function.
ER-5: Indicates an error in the magazine position.
ER-6: Indicates an error in the laser pick-up position.
ER-7: Indicates an error in the laser focus on the disc.
In any of the above situations, try ejecting the CD magazine from the changer and make sure the
discs are clean, undamaged, and loaded correctly (refer to the Owner's Manual of the CD
cu
changer). Re-load the magazine and check for proper operation. You may also try activating the
RESET button
on the unit, but this will also erase the time and pre-set memories.
If the suggested measures do not solve the problem, contact an approved warranty station near
you for further assistance.
During disc changer operation, when the RND
button is pressed twice, the DISC and RND
indications will appear on the display panel and
the tracks on each disc in the magazine will be
played in a random, shuffled order. When the
tracks on the disc in play have all been played,
in random, the unit will select the next disc and
dp
play a randomly selected track on it. This will
or Ran-
continue until the Random Disc mode is
canceled by pressing the RND button again or
by activating the Repeat Play or Intro-Scan
ds
functions, or by pressing the MODE switch.
During disc play, pressing this button returns to
the beginning of the first track on the disc
currently being played. The CD changer disc
track counter will remain at the current disc
number, and TRACK number 01 will appear on
the display panel.
CD CH
CD CH
CD CHA A A A A NGER ERR
NGER ERR
NGER ERR
CD CH
CD CH
NGER ERR
NGER ERROR CODES
TRACK ONE POSITION (TOP)
OR CODES
OR CODES
OR CODES
OR CODES
12 12 12 12 12

Advertisement

Table of Contents
loading

Table of Contents