Resetting The Factory Settings (Reset) - wallas 4430 Installation, Operation And Service Instructions

D30061

Resetting the factory settings (Reset)

It is possible to restore the factory settings.
Proceed as follows:
• Disconnect the power source.
• Press the button "RELAY1" and keep it down.
• Connect the unit to the power source and keep the button down for at least 10
seconds.
• Release the button.
• The factory settings have now been restored.
In order to control the unit remotely via web browsers you will have to restart the
unit for a GPRS link (after resetting).
Proceed as follows:
• Log in using your passwords at remote.wallas.fi
• Choose the tab "Heater settings"
• Press the button [Update heater settings]
• Validation of the unit takes a couple of minutes; after the validation you will
receive a confirmation to your e-mail and a green
screen.
• The unit is now ready for use.
4430
Operation
- 46 -
en
P symbol is displayed on the
490538