Starting And Stopping The Heater; Adjusting Heater Temperature - wallas 4430 Installation, Operation And Service Instructions

4430
en
Operation

Starting and stopping the heater

During the heater starting or stopping process a dialog box appears where you can
confirm the selection [YES] [NO]. Furthermore, it also contains a notice, warn-
ing that in the case there is a closable exhaust lead-through it is open before the
heater is started.

Adjusting heater temperature

There are two different options for adjusting the heater temperature, depending on
the operating system of your touch-screen phone.
Adjustment option 1:
To adjust the temperature, move the cursor of the mouse or, if you have a touch-
screen, your finger to the control panel adjustment button. By turning the button the
desired temperature is displayed on the screen; to confirm the temperature move
the cursor or the finger away from the button. The set temperature is flashing on
the screen. The set temperature is shown by the position of the button; the actual
measured temperature is displayed on the text display.
Adjustment option 2:
To adjust the temperature touch/ tap with your finger or the mouse cursor on the
position of the power controller where you wish the controller to move. The control-
ler will leap to the selected position and the temperature being set is flashing on
the screen. The set temperature is shown by the position of the button, the actual
measured temperature is displayed on the text display.
D30071
490538
- 43 -