Fault Indication 0 - Honeywell DF-RC Manual

FAULT INDICATION
The displays below indicate possible fault situations.
See also Terminate Lock-Out Failure.
Communication failure between RF remote control
and decorative fire. The symbol
distance between the decorative fire and the RF
remote control is probably too large. Hold the RF
remote control nearer to the decorative fire.
Fault of the decorative fire. The display shows an
F, followed by a -digit fault code. The symbol
flashes.
A so called lock-out fault of the decorative fire. On
the display an F, followed by a -digit fault code, is
shown. The text reset indicates that the decorative
fire can be reset. The symbol
flashes. The
flashes.
0