Terminating A Lock-Out Failure 1 - Honeywell DF-RC Manual

Terminating a Lock-Out Failure
A lock-out failure (the text reset is shown) of the decorative fire could
possibly be terminated. Press keys
below is shown.
Note: Consult also the manual of your decorative fire or consult your
installer.
Failure of the temperature sensor of the decorative
fire. The temperature sensor in the RF remote
control operates as normal. The text
measured temperature are shown alternating. The
display shows this situation in case a time schedule
has been choosen.
Failure of the temperature sensors of both the RF
remote control and the decorative fire (or the latter
not present).
There is an automatic switchover to manual
operation with flame height control.
The symbol
the decorative fire. After the decorative fire has been
reset, the default display is shown. The decorative
fire can be reset -times per day at the most.
and simultaneously. The display
indicates that it is possible to reset
and the
1