GRAVITY LTS TRAY 1 Quick Start Manual

LTS TRAY 1
LAPTOP TRAY WITH ADJUSTABLE HOLDING PINS
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from
the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to product
failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of packaging,
please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please contact
your local distributor.
MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARATIONS_GRAVITY.
pdf
To request warranty service for a product, please contact Adam Hall GmbH, Adam-Hall-
Str. 1, 61267 Neu Anspach / Email Info@adamhall.com /
49 (0) 6081 / 94 19-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that
this appliance may not be treated as household waste. This is to avoid environmental
damage or personal injury due to uncontrolled waste disposal. Please dispose of this prod-
uct separately from other waste and have it recycled to promote sustainable economic
activity.
Gravity is a registered brand of the Adam Hall Group
®
FEATURES
• Universal attachment for 35mm tubes
• Suitable for laptops, tablets, smaller mixer and effects
• Sturdy steel construction with clamping screw
• Adjustable holding pins
• Easy to handle
DESCRIPTION
No matter if you're working on stage, at home, in the studio or on location at a photo
shoot,
the Gravity ® LTS TRAY 1 laptop stand will transform your speaker stand into a mobile
workstation. Now your laptop can stay firmly fixed in place and stable at all times in your
mobile performance rigs – positioned just the way you want.
The large mounting plate can accommodate all standard laptop sizes ranging from
12" to 17".
Your laptop is carefully and securely attached to the stand thanks to 14 slots in the top
section, 2 slots in the bottom section, and the freely adjustable holding pins and clamps
that come supplied with the product. The holding pins are pressed onto the laptop and
then locked into place from below using the set screws.
You can also use the stand for your DJ controller, mixer or other pieces of equipment that
you always need within arm's reach. The mounting plate can be tilted continuously by
180°, meaning it can be used both in vertical and horizontal applications.
Laptop attachment to all standard tripods with a 35 mm diameter, such as the Gravity
SP 5111 B, is possible.
With the LTS TRAY 1 laptop tray, Gravity
mobile performance rigs.
SPECIFICATIONS
Product number
Product type
Type
Material
Color
Suitable for tube diameter
Width adjusting jaws
Width spacing between adjusting
pins min.
Width spacing between adjusting
pins max.
Height spacing between adjusting
pins to adjusting jaws min.
Height spacing between adjusting
pins to adjusting jaws min.
Width spacing between adjusting
jaws min.
Width spacing between adjusting
jaws max.
Tray width
Tray height
Interchangeable rings
Black ring pack included
Accessories (included)
Weight
Adam Hall GmbH | Adam-Hall-Str. 1
61267 Neu-Anspach | Germany
offers you a flexible companion for your
®
GLTSTRAY1
Stands and Tripod Accessories
Laptop holder
Steel
Black
35 mm
40 mm
120 mm
425 mm
117 mm
250 mm
130 mm
360 mm
480 mm
330 mm
5x 15 mm, 1x 25 mm, 1x 30 mm
Yes
2x Adjusting pins, 2x Adjusting jaws, 4x Locking
screws, Base plate with 35 mm pole mount
and locking screw, Locking screw for tilt
adjustment
2.08 kg
Phone: +49 60 81 · 94 19-0
adamhall.com
®