GRAVITY Solo-G GGSA01 Series Quick Start Manual

GGSA01
Gravity Solo-G - A-Frame Guitar Stands

SAFETY INFORMATION

1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information
from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to
product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of
packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please
contact your local distributor.
MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: http://www.
adamhall.com/media/shop/downloads/documents/manufacturersdeclarations.
pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Daimler Straße 9, 61267 Neu Anspach / Email Info@adamhall.com /
49 (0) 6081 / 9419-0

PROPER DISPOSAL OF THIS PRODUCT

(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product, indicates
that this appliance may not be treated as household waste. This is to avoid environ-
mental damage or personal injury due to uncontrolled waste disposal. Please dis-
pose of this product separately from other waste and have it recycled to promote
sustainable economic activity.
GGSA01A

FEATURES

Straightforward, rock solid construction
Soft rubber backrest and TPU padding
Two angles of splay
Folds up flat for transport and storage

OPERATION

With its Solo-G series Gravity introduces three new stands for acoustic and clas-
sical guitars, for electric and bass guitars and a universal design that accom-
modates most body shapes. The A-frame stands are made of heavy-duty steel
tubing with black powder coating finish, soft rubber backrest and TPU support
arm padding to protect the instrument's finish and nonslip rubber feet. Providing
two splay angle options, the tilt back Solo-G design folds up to compact dimen-
sions nicely for easy portability.

SPECIFICATIONS

Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com
Product type: guitar stand
Material: steel
Surface: powder coated
Color: black
Suitable for: GGSA01A: acoustic guitars, GGSA01E: electric
guitars and bass guitars, GGSA01U: universal
acoustic guitars, electric guitars and bass guitars
Weight: 1.5 kg
Black ring pack included: yes
GGSA01U