NETGEAR EPS90W Installation Manual

Installation Guide

External Power Adapter

Model EPS90W, EPS130W, and EPS200W
WARNING: Read this document first before connecting the new
power adapter to a device.

Package contents

• Power adapter
• Power cord (varies by region)
• Installation guide

Flexible PoE power budget

For NETGEAR switches that support a flexible PoE budget, you
can increase or decrease the available PoE power. To do this, you
must first change the PoE power budget setting for the switch and
then connect the new power adapter. For managed switches, log
in to the local browser interface to change the PoE power budget.
Unmanaged switches come with a physical PoE power budget
setting on the hardware.
Note: Only connect the power adapter to a compatible NETGEAR
switch listed in the following table.
Switch Power Adapter Power Adapter
Model Model Wattage
GC108P and EPS130W 130W
GC108PP
GS110TPP EPS130W 130W
EPS200W 200W
GS108LP and EPS90W 90W
GS108PP
EPS130W 130W
GS116LP and EPS90W 90W
GS116PP
EPS130W 130W
EPS200W 200W

Register with the NETGEAR Insight app

Use the NETGEAR Insight app to register your new power adapter
(and your switch if you haven't already) to activate your warranty
and access support.
1. On your iOS or Android mobile device or tablet, visit the app
store, search for NETGEAR Insight, and download the latest
version of the app.
PoE+ Power
2. Open the NETGEAR Insight app.
Wattage
3. If you did not set up a NETGEAR account, tap Create
NETGEAR Account and follow the onscreen instructions.
126W
4. Enter the email address and password for your account and
120W tap LOG IN.
190W
5. To register the new power adapter, tap the menu in the upper
left corner and select Register Any NETGEAR Device.
83W
123W 6. Scan the serial number barcode using the camera on your
mobile device, or manually enter the 13-digit serial number.
76W
7. Tap Go.
115W
8. To register your switch, repeat Steps 5–7.
183W