NETGEAR EPS90W Installation Manual

Installation Guide

External Power Adapter

Model EPS90W, EPS130W, and EPS200W
WARNING: Read this document first before connecting the new
power adapter to a device.
Package contents
• Power adapter
• Power cord (varies by region)
• Installation guide

Flexible PoE power budget

For NETGEAR switches that support a flexible PoE budget, you
can increase or decrease the available PoE power. To do this, you
must first change the PoE power budget setting for the switch and
then connect the new power adapter. For managed switches, log
in to the device management UI to change the PoE power budget.
Unmanaged switches come with a physical PoE power budget
setting on the hardware.
Note: Only connect the power adapter to a compatible NETGEAR
switch listed in the following table.
Switch Power Adapter Power Adapter
Model Model Wattage
GC108P and EPS130W 130W
GC108PP
GS110TPP EPS130W 130W
EPS200W 200W
GS108LP and EPS90W 90W
GS108PP
EPS130W 130W
GS116LP and EPS90W 90W
GS116PP
EPS130W 130W
EPS200W 200W

1. Register your power adapter

Use the NETGEAR Insight app to register your new power adapter
(and your switch if you haven't already) to activate your warranty
and access support.
1. From a computer or mobile device that is connected to the
Internet, visit my.netgear.com.
2. Log in to your NETGEAR account.
If you don't have a free NETGEAR account, you can create one.
The My Products page displays.
3. From the menu on the left, select Register a Product.
PoE+ Power
4. In the Serial Number field, type the serial number of your
Wattage
switch.
126W
The serial number is 13 digits long. It is printed on the switch
label.
120W
5. From the Date of Purchase menu, select the date that you
190W
purchased the switch.
83W
6. Click the REGISTER button.
123W
Your switch is registered to your NETGEAR account.
76W A confirmation email is sent to your NETGEAR account email
address.
115W
7. To register your switch, repeat Steps 5–7.
183W