Living & Co SURI BUBBLE LAMP Instructions

Please read these instructions and warnings carefully before operating to ensure safe
Warnings:
This is a Class II product and does not require an earth connection.
•
Always use the correct type and wattage of bulb.
•
When changing a bulb, always switch off the light at the wall socket and allow
•
the bulb to cool down before handling.
Dispose of old bulbs carefully.
•
• Do not handle bulb glass directly, always use a clean dry lint free cloth to avoid
contamination of the glass surface. Failure to handle correctly will result in premature
bulb failure and / or explosion of the bulb.
Do not switch on the light until the assembly is complete.
•
• Only use the lamp fitting on a stable / dry and level support surface.
Do not cover the lamp or bulb during use as this could be a potential safety hazard
•
Turn off the appliance when not in use.
•
The luminaire is not intended for use by children unless suitable adult supervision is
•
provided.
Children should be supervised to ensure they do not play with the luminaire.
•
The fitting is intended for indoor use only.
•
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively
•
replaced by the manufacturer or his service agent or a similar qualified person in order to
avoid a hazard.
Do not use excessive force to tighten the shades, these are constructed from glass and
•
can be broken if overtightened.
CAUTION: Ensure that the light bulb is not within the recommended 0.5m of any surface
when operating as this could be a potential safety hazard.
CAUTION: Never exceed the bulb wattage stated.
temperatures, Do Not Touch the glass when in operation or until the surface has cooled.
MARKETED BY: The Warehouse, 26 The Warehouse Way, Northcote, Auckland 0627 - Phone: 0800 422274
Living & Co
SURI BUBBLE LAMP
Instructions
and satisfactory operation of this product.
Please also retain these instructions for future use.
The glass shades of this lamp fitting attain high operating