Summary of Contents for Living & Co MILOS 6 DRAWER LOWBOY
Page 1
MILOS 6 DRAWER LOWBOY INSTRUCTION MANUAL Maximum weight for table top 20kg, Drawer 5kg This icon in assembly instructions indicates important notes that users should follow during assembly. To reduce paper waste and protect the environment, less pages are used and instructions are printed on recycled paper.
Tips before you start For the protection of your furniture, we recommend that the product is placed on a protected surface during assembly to prevent any damage. Check and fasten all the nails and screws before use, any connection fail- ure may lead to hazards, e.g.
Page 7
Assembly It is recommended that 2 people are required on this step, Insert all part G cam lock screws into the location on part 3, please ensure the centre lip on part G are all facing the same direction and stopping when they touch part 3 surface.
Page 10
Assembly B×1 N×1 Install all fixings into location and 80% tighten, once all parts are aligned 100% tighten all fixings. A×6 B×6...
Page 11
Assembly Install all fixings into location and 80% tighten, once all parts are aligned 100% tighten all fixings until parts are captivated, do not over tighten. I×8 J×8 K×8 L×5 D×18 E×18...
Page 12
Assembly Please ensure not to mix left and right draws once completely assembled before installation placement for step 16 in correct orientation C×18 M×3 D×18 E×18...
Page 13
Assembly Please ensure not to mix left and right draws once completely assembled before installation C×18 M×3 placement for step 16 in correct orientation Please ensure to assemble part 10 left drawer and part 8 right drawer in correct orientation.
Need help?
Do you have a question about the MILOS 6 DRAWER LOWBOY and is the answer not in the manual?
Questions and answers