Repose Multi Bari User Manual page 13

Standard Dual Motor
The two motors allow the back rest to move independently of the leg rest enabling a wide range of
relaxing positions, from sitting upright and raising the leg rest to relieve tired legs, to a fully reclined
resting position. Leg section elevation can support reduction in oedema and fluid retention. This
reduced fluid in the lower limbs allows a user to maintain their standing and walking abilities.
When the seat is in the rise position it tilts transferring the user's weight to their knees and taking
away the pressure on the hips allowing them to walk away from the chair more easily.
Full Rise Static Position Independent Back Rest
Seat chaise and cover
The Multi Bari benefits from a single, full seat cover
and chaise. This chaise removes any pinch points and
reduces the risk of pressure areas developing because
of them. It also provides deep comfort to all parts of
the body in contact with the chair. The chaise cover
and memory foam are removable and once removed
you can access the seat cushion.
To remove firstly take off the back cushion. Then at
the back of the seat cushion release the chaise from
the Velcro and peel off the chaise. The chaise is also
secured by Velcro to the front of the seat and under
the footplate, again simply peel off.
Seat Depth adjustment
(Optional)
The seat depth is very important as it should be long
enough to support the upper part of the legs whilst
allowing the user's back to rest comfortably on the
backrest. The Multi Bari has the option of a choice of
two sets of detachable adjuster pads, 25.4mm (1") or
50.8mm (2"). They simply fit behind the back cushions
using the Velcro strips, as the image demonstrates.
Semi Recline Footrest Horizontal Fully Reclined
13