Warning Labels And Safety Instructions - Master Bilt DD Series Installation And Operation Manual

Ice cream dipping-display merchandisers
Table of Contents

Advertisement

WARNING LABELS AND SAFETY INSTRUCTIONS

This symbol is used to alert user that there is risk of fire or explosion since flammable refrigerant is
used. This symbol can be observed on back or sides of cabinet.
Be sure you understand all safety messages and always follow recommended precautions and safe operating
practices.
NOTICE TO EMPLOYERS
You must make sure that everyone who installs, uses or services your cabinet is thoroughly familiar with
all safety information and procedures.
Important safety information is presented in this section and throughout this section and throughout the manual.
The following signal words are used in the warnings and safety messages:
DANGER: Severe injury or death will occur if you ignore the message.
WARNING: Severe injury or death can occur if you ignore the message.
CAUTION: Minor injury or damage to your cabinet can occur if you ignore the message.
NOTICE: This is important installation, operation or service information. If you ignore the
message, you may damage your cabinet.
The warning and safety labels shown throughout this manual are placed on your cabinet at the factory.
Follow all warning label instructions. If any warning or safety labels become lost or damaged, call your
customer service department at 800-388-5253 for replacements.
This label is located on top of the electrical control
label and on the wiring channel.
This symbol is the safety-alert symbol. When you see this symbol on your cabinet or in this
manual, be alert to the potential for personal injury or damage to your equipment.
CAUTION!
GROUND REQUIRED
FOR SAFE OPERATION
This label is attached to the cabinet power cord
on models with a power cord.
4
5/21 Rev. E 143568

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ddl seriesDdlcg

Table of Contents