Table of Contents
Advertisement
CONTROLLER SENSOR PROBE LOCATION
In DD-46,DD-66 & DD-88 models, the bulbwell is a straight 3/8" copper tube placed 3" below the dog house as
shown below. For the DD-26 model the bulb well is inverted "L" shape as as shown in the picture. Please make
sure the bulb well opening is properly insulated with permagum. While replacing the sensor probe please make
sure the probe is inserted to the end of the bulb well till it stops. Special care needs to be take during iserting the
probe inside the bulb well so that it is will not be damaged.
Make sure the probe is fully inserted into the bulb well till the mark up.
Bulbwell location with sensor probe
(representation only)
Bulbwell in DD-26
Red: DD-26
Green: DD-46
Yellow: DD-66
Blue: DD-88
The sensor probe is color coded as shown below.
Sensor probe with bulbwell foamed
Bulbwell location in DD-46, DD-66
14
& DD-88
5/21 Rev. E 143568
Advertisement
Table of Contents
