Setting Measurement; Switch-On Protection - mru OPTIMA7 biogas User Manual

5.3. Setting measurement

► Press F3.
► Press F3.
► Press F3.
In the "Measurement settings" menu you can make for example the fol-
lowing adjustments:
Temperature Unit
Pressure Unit
Explanation for "Helping hints":
Some helpful hints which are very useful for an inexperienced user but
are not needed by experienced users, can be activated or deactivated.
The following hints will be affected
"Zeroing finished, Sensors are ready. Analyzer ready for measurement."
"Reminder! Charge batteries at regular intervals!"
"Measurement stopped/started."

5.4. Switch-ON protection

If activated and if ON key is pressed (possibly inadvertently), then the
message: „Power-On protection is activated! Press key OK for 3 seconds
is displayed.
MRU GmbH, D-74172 Neckarsulm
USER MANUAL OPTIMA7 Biogas
 The Extras menu appears.
 The menu Settings appears.
 The menu Measurement settings appears.
°C, °F
Pa, hPa/Pa, hPa,
kPa/Pa, kPa, mbar,
mmH2O, cmH2O,
inH2O, mmHg,
inHg, PSI,
Change the unit for temperature in all screens
Change the unit for pressure in all screens. The
meaning of hPa/Pa and kPa/Pa is that the in-
strument performs a dynamic change of unit
depending on the absolute value of pressure.
22 / 78